Creality K2 Plus Combo 3D Printer, Multi Color Printing with CFS, 600mm/s Print Speed, Step-servo Motor System 350℃ High-Temp Direct Drive Extruder Build Volume 13.78x13.78x13.78 inch

Brand: Comgrow

Features:

• Multi Color Printing: Creality K2 Plus Combo 3d printer, combines with a K2 Plus 3d printer and a CFS. Which can fulfill the multi color printing, up to 16 colors can be printed together. Single color printing is tedious, this printer brings you a new experience in printing job, increasing much fun in your life. An intelligent management of multiple filaments, no worry to paint your prints
• Efficient Printing: Creality K2 Plus Combo, adopting industry-grade FOC step-servo motors for the XYZ axis and extrusion. The five powerful motors work in unison, each offering 32,768 controllable microsteps per revolution for ultra precise positioning. This takes the printing performance to the next level. For a large-format machine, it can reach to 600mm/s. Turbocharged by the step-servo motors, it can accelerate at a staggering 30000mm/s. Auto tilt reduction, two Z-axis are independently motorized for movement, able to reduce the bed tilt automatically. Auto Leveling Compensation, a strain gauge in the toolhead auto-probes the bed and create an accurate leveling mesh
• Durable Direct Drive Extrusion: Creality K2 Plus Combo equips hardened steel gears for better durability No issue coping with the repeated filament ingress and egress. 40mm³/s high-flow hotend powered by an 80W powerful heater, the flow rate of ABS at 280℃ can reach 40mm³/s, 66% higher than the previous design. The tri-metal nozzle curbs heat creep effectively for minimal clogs, and the integrated nozzle design and the magnetic front cover make the nozzle swap a breeze
• Advanced Heating Structure: Creality K2 Plus has an actively heated chamber, which creates a thermostatic environment up to 60℃. Essential to forge strong prints in ASA, PPA and other high-end materials 60℃ chamber temperature for ABS, ASA, PPS, 50℃ chamber temperature for PATCH-CF. High-temp nozzle with hardened steel tip can reach to 350℃. Designed for use with wear-resistant engineering materials of high melting points. Supports more selection of materials, including PLA/ABS/PETG/PA-CF/PLA-CF/PET/ASA/PPA-CF
• Upgraded Function: 1.Active Belt Tensioning: On the K2 Plus Combo 3d printer, the belt tension is checked and rigged actively by a pressure sensor instead of manually. 2.Two AI Cameras: K2 Plus uses an Al camera on the chamber side to watch over spaghetti failure, foreign objects, idling, etc. It will alert you when an error occurs. lt also supports real-time monitoring and time-lapse filming. There is also an Al camera on the toolhead. lt can analyze 3d model and then generate an optimal PA value or flow rate. 3.Two Auxiliary Fans: The part cooling airflow is nearly doubled as two auxiliary cooling fans are installed on the left and right sides of the chamber
• Package Including: 1x K2 Plus 3d printer + 1x CFS + 4x 500g filament (color: 1x black, 1x white, 1x red and 1x blue)

Binding: Electronics

model number: K2 Plus Combo

Part Number: K2 Plus Combo

Package Dimensions: 28.0 x 25.0 x 23.0 inches